1) Download 'ns-allinone-2.35' from :
http://sourceforge.net/projects/nsnam/files/allinone/ns-allinone-2.35/ns-allinone-2.35.tar.gz/download
2) Extract the downloaded zip file 'ns-allinone-2.35.tar.gz file' to desktop.
3) Now you need to download some essential packages for ns2,these packages can be downloaded by using the following command : applications>accessories>terminal or dashhome>trminal
then type the below line on the terminal window
"sudo apt-get install build-essential autoconf automake libxmu-dev libtool gcc"
or type this command
"sudo apt-get install autoconf automake gcc g++ build-essential libxmu-dev libtool libxt-dev"
4) Now change your directory(here i have already extracted the downloaded files to desktop,so my location is desktop) type the following codes in the command window to install NS2.
cd Desktop
cd ns-allinone-2.35
./install
The installation procedure will take a few minutes..........
5) After compleating the installation type the following command in the command window
gedit ~/.bashrc
6) Now an editor window appears,please copy and paste the follwing codes in the end of the text file (note that '/home/abhiram/Desktop/ns-allinone-2.35/octl-1.14' in each line in the below code should be replaced with your location where the 'ns-allinone-2.35.tar.gz'file is extracted)
# LD_LIBRARY_PATH
OTCL_LIB=/home/abhiram/Desktop/ns-allinone-2.35/otcl-1.14
NS2_LIB=/home/abhiram/Desktop/ns-allinone-2.35/lib
X11_LIB=/usr/X11R6/lib
USR_LOCAL_LIB=/usr/local/lib
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$OTCL_LIB:$NS2_LIB:$X11_LIB:$USR_LOCAL_LIB
# TCL_LIBRARY
TCL_LIB=/home/abhiram/Desktop/ns-allinone-2.35/tcl8.5.10/library
USR_LIB=/usr/lib
export TCL_LIBRARY=$TCL_LIB:$USR_LIB
# PATH
XGRAPH=/home/abhiram/Desktop/ns-allinone-2.35/bin:/home/abhiram/Desktop/ns-allinone-2.35/tcl8.5.10/unix:/home/abhiram/Desktop/ns-allinone-2.35/tk8.5.10/unix
NS=/home/abhiram/Desktop/ns-allinone-2.35/ns-2.35/
NAM=/home/abhiram/Desktop/ns-allinone-2.35/nam-1.15/
PATH=$PATH:$XGRAPH:$NS:$NAM
7) Save and close the text editor and then type the following command on the terminal
source ~/.bashrc
8) Close the terminal window and start a new terminal window and now change the directory to ns-2.35 and validate ns-2.35 by exicuting the following command ( it takes 30 to 45 minutes)
cd ns-2.35
./validate
9) If the installation is successful, then you will be able to see % at the command prompt while typing the following command
ns
10) Now type
exit
INTRODUCTION Network Simulator Version 2, widely known as NS2, is an event driven simulation tool that is useful in studying the dynamic nature of communication networks. Simulation of wired as well as wireless network functions and protocols (e.g., routing algorithms, TCP, UDP) can be done using NS2. In general, NS2 provides users with a way of specifying such network protocols and simulating their corresponding behaviors. Due to its flexibility and modular nature, NS2 has gained constant popularity in the networking research community since its birth in 1989. Ever since, several revolutions and revisions have marked the growing maturity of the tool, thanks to substantial contributions from the players in the field. Among these are the University of California and Cornell University who developed the REAL network simulator,1 the foundation which NS is based on. Since 1995 the Defense Advanced Research Projects Agency (DARPA) supported development of NS through the Virtual ...
Comments
Post a Comment